Bischoff & Bischoff GmbH | 01.06.2019
EN
69
68
Taiga
| Electric Wheelchair
Electric Wheelchair |
Taiga
4.4. Entering and leaving
Entering and leaving from the side
•
Move the wheelchair as close as possible to the present or future
seat so they are side by side.
•
If you wish to move from another wheelchair or room chair, lock it
by setting the parking brakes.
•
Lock the Taiga to prevent it from moving accidentally by pressing
the On/Off button to switch off the control (all displays off).
•
You must also activate the mechanical locking brake when the
drives are disengaged.
•
Remove the arm rest and side section.
•
Fold the foot plates to the side or remove the leg rests.
•
Now slide sideways onto the other seat.
•
Make sure that you are sitting as far back in the seat as possible.
•
Move the arm rest and leg rests to the original position.
Entering and leaving from the front
•
First fold the foot plates up or remove the leg rests.
•
Move the Taiga as close as possible to the present or future seat
front to front.
•
If you wish to move from another wheelchair or room chair, lock it
by setting the parking brakes.
•
Now slide onto the seat by turning your body around.
•
Then move the arm rest and leg rests to the original position.
4.5. Driving the wheelchair
•
Make sure that you are comfortably and securely seated.
•
Press the On/Off button to switch on the Taiga.
•
All electrical driving functions are now available.
Driving functions
Your dealer can adjust the values for speed, acceleration and
deceleration to your requirements subject to the legal regulations.
For a start select a low mode and increase it while moving if required.
Use the joystick to start moving. The joystick is used simultaneously to
increase the speed and to change the direction of movement. When
the joystick is in central position the electro-magnetical brake is active,
unless the joystick is not moved the wheelchair stands still.
Moving forward:
to move forward in a straight line move the joystick
cautiously forward. The further forward the joystick is moved, the faster
your wheelchair gets. If you release the joystick the wheelchair will
automatically be braked to a stop.
Reversing: to move in reverse mode, move the joystick cautiously back.
The further back the joystick is moved, the faster your wheelchair gets.
If you release the joystick the wheelchair will automatically be braked
to a stop.
Before moving check that the electromagnetic brake
is correctly locked. The safest way is to make sure
the electrical wheelchair is switched OFF!