Rev: 03/2009
KNX-GSM Gateway
Page 5 of 19
©
b+b Automations- und Steuerungstechnik GmbH
KNX-GSM GATEWAY.DOC
Highlights KNX-GSM Gateway
•
Bi-directional
EIB/KNX
ÅÆ
GSM communication via short messages (SMS)
•
Quadband GSM support for worldwide use
•
Only additional SIM card required, no other hardware is needed
•
Integrated EIB/KNX – bus coupling unit with two wire EIB/KNX connector
•
Integrated real time clock
•
Writing values to all 32767 groupaddresses by SMS
•
Up to 100 event messages can be set to up to 8 receivers
•
A receiver can be: (*: network provider dependent)
¾
mobile
phone
¾
telephone
*
¾
fax
*
¾
e-mail address *
•
Eight event time ranges are possible, time synchronisation via EIB-DCF
•
Access control for protection against unauthorized access to your EIB/KNX – installation:
¾
phone number filter
¾
password protection for commands via SMS
¾
groupaddress
filter
•
Alarm
input
•
Automatic log in to the GSM network after power failure
•
Alarming on sabotage, bus voltage loss, bus voltage return
•
Routine event message every X hour for monitoring the gateway („Alive – SMS“)
•
Event message when starting the gateway („BootUp – SMS“)
•
Easy configuration using the EIBDoktor software
Fields of application
•
Remote control your EIB/KNX – installation via mobile phone over GSM network
•
Monitor your EIB/KNX – installation via mobile phone over GSM network
Contents of delivery
•
KNX-GSM
Gateway
•
Dualband GSM antenna (supports GSM frequency bands 900MHz and 1800MHz)
•
EIBDoktor software for configuration
•
Documentation
