Bischoff & Bischoff GmbH | 12.11.2015
EN
21
FORTIS
| Scooter
Scooter |
FORTIS
24
23
For safety reasons, the motor drive is locked when
the scooter is being operated in pushing mode.
Caution! Danger of fatal injury! The drives must
only be disconnected on a level surface.
4.4.1. Brakes in pushing mode
A manual service brake is attached to your scooter (as described in
section 2.3). This can be used for support with braking when the drives
are connected; it can also be used as a service brake when the drive is
disconnected. The service brake acts on both front wheels and also
serves as a locking brake.
Parking and locking the brake is performed by locking the drive. For this
purpose, the scooter must be brought to a standstill by a helper and/
or by using the manual service brake. The electro-mechanical brake, as
shown in figure 23, must then be activated.
4.5. Overload switch
If the motor is overloaded due to driving uphill for too long, for example,
it switches off automatically. This protects the motor and the
electrical components.
After the motor has switched off in such a manner, please wait a few
minutes and then press the overload switch. (See fig. 24)
The overload switch is located on the seat mounting, directly under the
housing cover. (See fig. 25)
25
