B+B SmartWorx SE400 Series User Manual Download Page 78

Page: 78 / 116

SE400 SERIES

MAC Address Table

The MAC Address Table provides access to the Static MAC Settings, MAC Aging Time, and
Dynamic Forwarding.

The Static MAC page allows you to configure the address for forwarding of packets, the VLAN
ID of the listed MAC address and the designated Port.

To access this page, click

MAC Address Table

Static MAC

Figure 77: MAC Address Table > Static MAC

The following table describes the items in the previous figure.

The ensuing table for

Static MAC Status

settings are informational only: No., MAC Address,

VLAN, Port and

Delete

(click to delete the desired MAC address).

Static MAC

Table 59: MAC Address Table > Static MAC

Item

Description

MAC Address

Enter the MAC address to which packets are statically forwarded.

VLAN

Click the drop-down menu to select the VLAN ID number of the VLAN for
which the MAC address is residing.

Port

Click the drop-down menu to select the port number.

Apply

Click

Apply

to save the values and update the screen.

Summary of Contents for SE400 Series





















































































































Search results

Summary of Contents for SE400 Series

Reviews:

Brands by name

Popular brands

B+B SmartWorx SE400 Series, User Manual

Search results

Summary of Contents for SE400 Series

Reviews:

Brands by name

Popular brands