92
SE400 SERIES
The Ping Test page allows you to configure the test log page.
To access this page, click
Diagnostics
>
Ping Test
.
Figure 110: Diagnostics > Ping Test
The following table describes the items in the previous figure.
Ping Test
Table 92: Diagnostics > Ping Test
Item
Description
IP Address
Enter the IP address or host name of the station to ping. The initial value is
blank. The IP Address or host name you enter is not retained across a power
cycle. Host names are composed of series of labels concatenated with peri-
ods. Each label must be between 1 and 63 characters long, maximum of 64
characters.
Count
Enter the number of echo requests to send. The default value is 4. The value
ranges from 1 to 5. The count entered is not retained across a power cycle.
Interval (in sec)
Enter the interval between ping packets in seconds. The default value is 1.
The value ranges from 1 to 5. The interval entered is not retained across a
power cycle.
Size (in bytes)
Enter the size of ping packet. The default value is 56. The value ranges from
8 to 5120. The size entered is not retained across a power cycle.
Ping Results
Display the ping reply format.
Apply
Click
Apply
to display ping result for the IP address.
