60
SE400 SERIES
STP Port Advanced Settings
The STP Port Advanced Settings page allows you to select the port list to apply this setting.
To access this page, click
L2 Switching
>
Spanning Tree
>
STP Port Advanced Settings
.
Figure 69: L2 Switching > Spanning Tree > STP Port Advanced Settings
The following table describes the items in the previous figure.
The ensuing table for
STP Port Status
settings are informational only: Port, Identifier (Priority
/ Port Id), Path Cost Conf/Oper, Designated Root Bridge, Root Path Cost, Designated Bridge,
Edge Port Conf/Oper, P2P MAC Conf/Oper, Port Role and Port State.
MST Config Identification
The MST Config Identification page allows you to configure the identification setting name and
the identification range.
To access this page, click
L2 Switching
>
Spanning Tree
>
MST Config Identification
.
Figure 70: L2 Switching > Spanning Tree > MST Config Identification
The following table describes the items in the previous figure.
The ensuing table for
MST Configuration Identification Information
settings are informa-
tional only: Configuration Name and Revision Level.
Table 52: L2 Switching > Spanning Tree > STP Port Advanced Settings
Item
Description
Port Select
Select the port to designate the STP settings.
Priority
Click the drop-down menu to designate a priority.
Apply
Click
Apply
to save the values and update the screen.
Table 53: L2 Switching > Spanning Tree > MST Config Identification
Item
Description
Configuration Name
Enter the identifier used to identify the configuration currently being used. It
may be up to 32 characters.
Revision Level
Enter the identifier for the Revision Configuration, range: 0 to 65535 (default:
0).
Apply
Click
Apply
to save the values and update the screen.
