manualshive.com logo in svg

B+B SmartWorx SE400 Series, User Manual

Share
Download
B+B SmartWorx SE400 Series User Manual Download Page 59

46

SE400 SERIES

The ensuing table for 

LACP Port Information

 settings are informational only: Port Name, Pri-

ority, Timeout and Mode.

The 802.1Q VLAN feature allows for a single VLAN to support multiple VLANs. With the
802.1Q feature you can preserve VLAN IDs and segregate different VLAN traffic.

The 802.1Q VLAN tag feature encapsulates the 802.1Q VLAN tagging within another 802.1Q
VLAN tag. The outer tag is assigned following the AP group, while the inner VLAN ID is
assigned dynamically by the AAA server.

VLAN Management

The management of VLANs is available through the VLAN Settings page. Through this page
you can add or delete VLAN listings and add a prefix name to an added entry. 

To access this page, click 

L2 Switching

 > 

802.1Q VLAN

 > 

VLAN Management

.

Figure 52: L2 Switching > 802.1Q VLAN > VLAN Management

The following table describes the items in the previous figure.

The ensuing table for 

VLAN Table

 settings are informational only: VLAN ID, VLAN Name,

VLAN Type and 

Edit

 (click to enter VLAN name).

802.1Q VLAN

Table 35: L2 Switching > 802.1Q VLAN > VLAN Management

Item

Description

VLAN list

Enter the name of the VLAN entry to set up.

VLAN Action

Click the radio button to add or delete the VLAN entry shown in the previous 
field.

VLAN Name Prefix

Enter the prefix to be used by the VLAN list entry in the previous field.

Apply

Click 

Apply

 to save the values and update the screen.

Summary of Contents for SE400 Series





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands