IE
-MultiWay
9
IVIEW
2
(ICONFIG VIEW)
iView
2
(iConfig view) is an in-band utility created by B+B SmartWorx that is used for
SNMP configuration for B+B SmartWorx’ SNMP manageable devices.
iView
2
(iConfig view) allows the following actions:
•
Set an IP address, subnet mask and default gateway.
•
Define community strings and SNMP Traps.
iView
2
(iConfig view) also includes an authorized IP address system and restricted access
to MIB groups which are supported by B+B SmartWorx’ manageable devices. These extra
layers of security do not affect SNMP compatibility. iView
2
(iConfig view) can upload new
versions of the system software and new MIB information. It also includes diagnostic
capabilities for faster resolution of technical support issues.
HARDWARE MOUNTING OPTIONS
The IE-MultiWay can mount on DIN rail or use a wall mount bracket (shown
below). DIN rail clips (part number 806-39105) and wall mount brackets (part
number 895-39229) are available for purchase from B+B SmartWorx
.
The IE-MultiWay can be mounted with two DIN rail clips, (available from B+B
SmartWorx). The DIN rail clips include screws to allow the installation on a DIN
rail. Install the screws into DIN rail clips (can be mounted parallel or
perpendicular to the DIN rail). Snap the converter onto the clips. To remove the
converter from the DIN rail, use a flat-head screwdriver into the slot to gently pry
the converter from the rail.
NOTE
:
DIN rail clips are designed for use on a DIN-35 rail.
