38
39
Notes:
a) The storage environment should be clean and must be disinfected
regularly;
b) Product storage must be batched and marked and recorded.
6.4.10 Transportation
1. Prevent excessive shock and vibration during transportation, and
handle with care;
2. It should not be mixed with dangerous goods during transportation.
3. Avoid exposure to sun or rain or snow during transportation.
7 Storage, maintenance and transportation
7.1 Storage
7.1.1 This equipment should be stored in a room where the relative
humidity is 10% ~ 93%, atmospheric pressure is 80kPa to106kPa, and
the temperature is -20°C ~ +55°C.
7.1.2 Avoid the storage in a too hot condition. High temperature will
shorten the life of electronic components, damage battery, reshape or
melt some plastic.
7.1.3 Avoid the storage in a too cold condition. Otherwise, when the
temperature of the equipment increases to a normal level, there will be
dew that will possibly damage PCB board.
7.2 Maintenance
7.2.1 This device does not include tools for repair, the repair should
be carried out by authorized person or authorized after-service center.
7.2.2 Keep the equipment in a dry storage condition.
7.2.3 Do not throw, beat or shock the equipment.
7.2.4 Do not smear the equipment with pigments.
7.2.5 Calibration is recommended when using a new/other contra
angle or after an extend period of operation, as the running properties can
change with usage, cleaning and sterilization.
7.2.6 Replace the battery if it seems to be running out of power
sooner than it should.
7.3 Transportation
7.3.1 Excessive impact and shake should be prevented in
transportation. Lay it carefully and lightly and don’t invert it.
7.3.2 Don’t put it together with dangerous goods during
transportation.
7.3.3 Keep out of direct sunlight and avoid getting wet in rain and
snow during transportation.
8 Environmental protection
Please dispose according to the local laws.
9 After service
We will repair this equipment free of charge if there are quality
problems within the product's warranty period (valid from date of
purchase). This excludes: damage caused by not following the instruction
manual, lack of maintenance, unsuitable operation, disassembly
without authorization, accidental damage, unadvisable transporation or
preservation. The warranty periods are as follows:
Base, motor handpiece, power adapter: 2 years
Contra-angle: one year
Other spare parts: 6 months
10 European authorized representative
11 Symbol instruction
Follow Instructions
for Use
Serial number
Date of manufacture
Manufacturer
Type B applied part
Class
Ⅱ
equipment
Ordinary equipment
Recyclable
Used indoor only
Keep dry
Handle with care
Appliance compliance
WEEE directive
Summary of Contents for BA OPTIMA E+ BAE380R
Page 25: ...46 47 Notes Notes ...
