Ultra 440BX ATX Mainboard
AWARD BIOS SETUP
4-12
According to what was defined by the ACPI in Windows 98, the PW switch can be
either the "Standby switch" or "shutdown switch". When "Standby switch" is
selected, the first click on the PW switch will have the PC system turn into standby
mode. If you want to "wake up" the PC system, you will have to use the devices
(such as keyboard, mouse .. etc) which is specified in the Windows 98 ACPI
function to trigger the PC system so that it will be back to full-on mode. For more
detail of ACPI function, please refer to Windows 98 user's manual for more detail
information.
Power Management : (
Default setting: “User Define”)
This category allows you to select the type (or degree) of power saving and is
directly related to the following modes:
1.
Doze Mode
2.
Standby Mode
3.
Suspend Mode
4.
HDD Power Down
There are four selections for Power Management, three of which have fixed mode
settings.
Disable (default)
No power management. Disables all four modes
Min. Power Saving
Minimum power management. Doze Mode = 1 hr.
Standby Mode = 1 hr., Suspend Mode = 1 hr., and HDD
Power Down = 15 min.
Max. Power Saving
Maximum power management --
ONLY AVAILABLE
FOR SL CPU
. Doze Mode = 1 min., Standby Mode = 1
min., Suspend Mode = 1 min., and HDD Power Down =
1 min.
User Defined
Allows you to set each mode individually. When not
disabled, each of the ranges are from 1 min. to 1 hr.
except for HDD Power Down which ranges from 1 min.
to 15 min. and disable.
PM Control APM:
(Default setting: "Yes" )
When enabled, an Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to
No
.
