Ultra 440BX ATX Mainboard
INSTALLATION
3-20
B.
Install PCI Bridge:
(You don't have to install this driver if you are installing Windows 98. This
driver is designed for Windows 95 only)
Step 1. Insert the CD into the CD ROM drive.
Step 2. Change the directory to "\Driver\mainboard\Intel\Utility "
Step 3. Run " WINP2X4.EXE" and follow the screen instruction to complete
the installation.
C. Install the Hardware Monitoring Program:
(optional)
(Please note that the Hardware Monitoring is optional on the board)
Step 1. Insert the CD into the CD ROM drive.
Step 2. Select directory "\Driver\mainboard\Hardware Monitoring\W83783S"
Step 3. Run "SETUP.EXE" to install the hardware monitoring program.
3.6
INSTALLATION OF THE ATA/66 IDE INTERFACE
There are four IDE interfaces designed on this mainboard and it will provide you
the maximum flexibility when installing the IDE devices. Two of those IDE ports
(CN28 and CN29) will support the ATA /66 data transfer mode to let your PC
system have better performance than other PC systems.
The ATA /66 mode is backward compatible with all ATA /33 system. So you can
use it to connect with all existing IDE devices. If you are using the hard disk drive
which supports the ATA/66 data transfer protocol, you will find data transfer rate
will be improved significantly when reading and writing data from the hard disk
drive.
