Ultra 440BX ATX Mainboard
INSTALLATION
3-30
Step 7. When you have configured
the HDD and specified the
path. NT setup program will
ask you to insert the disk
into drive A again. Make
sure the "
Ultra
ATA /66
Device Driver
" diskette is
in the floppy disk drive and
then click the "
Enter
" to
finish the installation.
B.
Install the drivers with the existing Windows NT
IMPORTANT: Please have the hard disk drive connected to IDE1 to start the
Windows NT operation system. If you have the hard disk connected to the ATA/66
IDE ports, the PC system will be failed to detect the hard disk properly and you can
not use it to load the operation system.
Step 1. Start the Windows NT
operation system and open
"
Control Panel
", and then
double click on the "
SCSI
Adapter
" icon.
Select the SCSI Adapter
Step 2. Select "
Drivers
", and then
click on the "
Add
" button.
