manualshive.com logo in svg

AZZA 361, User Manual

Share
Download
AZZA 361 User Manual Download Page 41

361 Mainboard Series

361 Mainboard Series 

 

Page 

Page 40

40  

 

PNP OS Installed 

 

This item allows you to determine if a PnP OS is installed or not. 

 

Reset Configuration Data 

 

Normally, you leave this field Disabled.  If you have installed a new add-on and the system 

reconfiguration has caused such a serious conflict that the operating system cannot boot then 

select Enabled. Selecting Enabled will reset the Extended System Configuration Data (ESCD). 

 

Resource controlled By 

 

Award Plug and Play BIOS has the capacity to automatically configure all of the boot and Plug 

and Play compatible devices.  However, this capability means absolutely nothing unless you 

are using a Plug and Play operating system such as Windows 98. 

 

IRQ Resources 

 

When resources are controlled manually, assign each system interrupt a type, depending on 

the type of device using the interrupt 

 

DMA Resources 

 

When resources are controlled manually, assign each system DMA channel as one of the fol-

lowing types, depending on the type of device using the interrupt. 

 

Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific 

interrupt (such as IRQ4 for serial port 1).  PCI/ISA PnP Devices compliant with the Plug and 

Play standard, whether designed for PCI or ISA bus architecture. 

 

PCI/VGA Palette Snoop 

 

Leave this field at 

Disabled 

all the time

 

 

Assign IRQ For VGA/USB 

 

A system’s IRQs are limited. Sometimes you may need to use more IRQ signals for your add-

on cards. BIOS allows you to disable the IRQ which is supposed to be connected to the VGA 

and USB ports. If you choose to disable the IRQ on the VGA or USB port, the IRQ will be re-

leased and becomes available for other devices. Please make sure that you have a USB or 

VGA adapter that does not need an IRQ before you select Disabled. 

3.9. PC Health Status 

3.9. PC Health Status 

 

 

 

 

The PC Health Status menu (

page 42

) allows you to monitor the health status of your PC 

system .You can select a field of interest and monitor it’s status . 

 

Current CPU Temp.  

 

This field shows the present CPU temperature. 

 

PC BIOSPC BIOS

  

Managing The PC BIOS

Managing The PC BIOS 

 

VIA_361_Manual_030701_Re... 
page 40

Wednesday, July 11, 2001 13:37 

Composite

Summary of Contents for 361















































Reviews:

No comments

Brands by name

Popular brands

Load more brands