AZZA 361 User Manual Download Page 3

Page: 3 / 46

361 Mainboard Series

Page

Page 2

USER’S NOTICE

Copyright

This publication contains information that is protected by copyright. No part of it may be

reproduced in any form or by any means or used to make any transformation adapta-

tion without prior written permission from the copyright holders. This publication is pro-

vided for informational purposes only. The manufacturer makes no representations or

warranties with respect to the contents or use of this manual and specifically disclaims

any express or implied warranties of merchantability or fitness for any particular pur-

pose. The user will assume the entire risk of the use or the results of the use of this

document. The manufacturer reserves the right to revise this publication and make

changes to its contents at any time, without prior notice.

Trademarks

Microsoft®, MS-DOS®, Windows

, Windows® 95 and Windows® 98 are registered

trademarks of Microsoft Corporation. AMD Duron

and AMD Athlon

are registered

trademarks of AMD corporation. Award is the registered trademark of Award Software,

Inc. Other trademarks and registered trademarks of products appearing in this publica-

tion are the properties of their respective holders.

Package Checklist

This package contains the following items:

•

Mainboard

•

Users manual

•

One IDE cable

•

One 34-pin floppy disk drive cable

•

One Driver Utility CD

If any of these items are damaged or missing, please contact your dealer or sales repre-

sentative for assistance.

Technical Support

If you require additional information or assistance during installation please contact your

dealer. Your dealer will be able to provide the latest information.

VIA_361_Manual_030701_Re...
page 2

Wednesday, July 11, 2001 13:37

Composite

Summary of Contents for 361















































Search results

Summary of Contents for 361

Reviews:

Brands by name

Popular brands

AZZA 361, User Manual

Search results

Summary of Contents for 361

Reviews:

Brands by name

Popular brands