manualshive.com logo in svg

AZZA 361, User Manual

Share
Download
AZZA 361 User Manual Download Page 19

361 Mainboard Series

361 Mainboard Series 

 

Page 

Page 18

18  

 

 

Hardware Installation

 

Hardware Installation

Hardware Installation 

 

2.5. System Panel Buttons and LED Connectors. 

 

PW  = Power on/off and Suspend switch connector. 

HL  = HDD LED connector 

RS  = Reset button connector

 

Power On / Off and External Suspend Switch Connector 

 

The Power On/Off connector has two functions. It can be the Power Switch or Suspend 

Switch of your PC system. You can either choose “

Delay 4 Sec or Instant OFF

” (Please 

refer to the Award BIOS setup instructions in Chapter 3) 

 

Option 1:

 If you choose  “

Delay 4 Sec.

” In the BIOS CMOS Setup, the function of “PW” will 

be: 

A.     When the system power is "OFF", press this switch, the system will power on.

 

B.

When system power is "ON”, you can select two different mode: - 

 

Mode 1:

 Press and hold the Power ON button for less than 4 seconds and then release it. 

The system will be turned into Suspend mode (turned into the GREEN mode) When the 

system is in the Suspend mode:- 

 

n 

 

Press the Power on button (less than 4 seconds), the system will return to Full-ON 

mode. 

n 

 

Press and hold the Power On Button for more than 4 seconds, the system will be pow-

ered off. 

 

Mode 2:

 Press and hold the Power ON button for more than 4 seconds, the system will be 

completely powered off. 

  

Option 2: If

 you chose  “

Instant OFF

.” In the BIOS CMOS Setup, the power switch will 

operate like a normal ON / OFF Power button.  

 

IDE HDD LED Connector 

 

Any read and write activity by the HDD will turn this LED on.  

 

 

PIN 1 

PIN 2 

PW 

HL 

RS 

Top View of the System Panel Buttons and LED Connectors 

VIA_361_Manual_030701_Re... 
page 18

Wednesday, July 11, 2001 13:37 

Composite

Summary of Contents for 361















































Reviews:

No comments

Brands by name

Popular brands

Load more brands