Azurite D35C, User Manual, Page: 39 / 44

Settings
39
Line settings
Before changing the settings of the telephone
line, contact your operator to obtain the
parameters for your line.
Modifying the network type
Your DECT telephone can be installed on a
public or private network (when using a PABX).
This function enables you to configure your
telephone according to the type of network.
On the navigator key , press or until
the
SETTINGS
screen is displayed, press
OK
to confirm.
Select
ADVANCED SET.
using or . Press
Valid.
.
Select
SET LINE
using or . Press
Valid.
.
Select
NETWORK TYPE
using or . Press
Valid.
.
A screen presents the current status (public or
private).
•
To keep the status, press
Valid.
.
•
To change the status, press
Edit
.
The status is modified on the screen, press
Valid.
.
To exit the menu, press the red key .
Modifying the dialling mode
Depending on the type of network your
telephone is linked to, it uses tone or pulse
dialling.
Note that as South Africa only uses Tone
dialling there is no need to change this
setting.
This function enables you to configure your
telephone according to the type of dialling used
by your network.
The default dialling mode is tone.
On the navigator key , press or until
the
SETTINGS
screen is displayed, press
OK
to confirm.
Select
ADVANCED SET.
. Press
Valid.
.
Select
SET LINE
. Press
Valid.
.
Select
DIAL
using or . Press
Valid.
.
A screen displays the current status (pulse or
tone).
•
To keep the status, press
Valid.
.
•
To modify the status, press
Edit
.
The status is modified on the screen, press
Valid.
.
To exit the menu, press the red key .
Modifying the flash duration (R
key)
If you connect your telephone to a private
automatic branch exchange or use it in a
foreign country, you may need to modify the
flash duration in order to use your telephone
correctly with regard to the following
functionalities: outgoing 2nd call, incoming 2nd
call, 3 way calling.
Contact your service provider to obtain the
correct flash duration and then modify it by
doing the following.
On the navigator key , press or until
the
SETTINGS
screen is displayed, press
OK
to confirm.
Select
ADVANCED SET.
. Press
Valid.
.
Select
SET LINE
. Press
Valid.
.
Select
FLASHING
using or . Press
Valid.
.
An information screen presents the current
flash duration.
To keep the duration, press
Confirm
.