Azurite D35C, User Manual, Page: 22 / 44

SMS settings
22
On the navigator key , press or until
the
SMS
screen is displayed, press
OK
to
confirm.
Select
SETTINGS
using or . Press
Valid.
.
Select
SUB-ADDRESS
using or . Press
Valid.
.
An information screen shows the current
number of the telephone SMS terminal.
An information screen shows the current
number of the telephone SMS terminal.
To change the number, press
Edit
. Then
select the number using or keys. Press
Valid.
.
To keep the terminal number, press
Confirm
.
To exit the menu, press the red key .
SMS boxes
"Personal boxes" allow you to receive personal
SMS. These SMS will arrive in the
New folder,
the box owner will be able to view them by
entering the user code that he will have
defined when creating his SMS box.
You can create up to 9 "personal boxes" which
allow the different users to manage their
private SMS (transmission, reception, archive).
Each box is protected by a code and identified
by a number representing the corresponding
sub-address.
Sub-Addressing
You have 10 sub-addresses (9 personal and 1
collective) assigned to your telephone line
(telephone number). You can assign each one
of these sub-addresses:
•
to a terminal (the SMS for this sub-
address arrive in the DECT base collective
box)
•
or to a personal box (the SMS received for
this sub-address arrive in the private pass-
word protected SMS box)
The sub-address is a number that must be
added at the end of your telephone number
(11th digit) by those who wish to send you
SMS.
If you use the same sub-address
twice for the same telephone line,
your units may not receive the
SMS for this sub-address.
If you do not give a terminal
number to each SMS capable
device that is connected to the
same telephone line , you cannot
receive SMS.
Creating a personal box
On the navigator key , press or until
the
SMS
screen is displayed, press
OK
to
confirm.
Select
SETTINGS
using or . Press
Valid.
.
Select
PRIVATE BOX
using or . Press
Valid.
.
Select
NEW
using or . Press
Valid.
.
Enter the box name.
Press
Valid.
.
If you enter a name that already
exists, a message tells you that
the name already exists. The box
name can have no more than 6
characters.
Enter the code associated to the box. Press
Valid.
.