Azurite D35C, User Manual, Page: 34 / 44

Settings
34
Modifying the base code
The base code ( 0000 being the default setting)
is required to access certain security functions.
It must be composed of 4 digits.
On the navigator key , press or until
the
SETTINGS
screen is displayed, press
OK
to confirm.
Select
SECURITY
using or . Press
Valid.
.
Select
CHANGE CODE
using or . Press
Valid.
.
Enter the old base code using the keypad
(default is 0000). Press
Valid.
.
Enter the new base code using the keypad.
Press
Valid.
.
Confirm by entering the new base code again.
Press
Valid.
.
To exit the menu, press the red key .
Carefully note down the base code
number. You will need this code to
change certain settings.
Authorising listening in
The intrusion function authorises or prevents a
second handset registered on the same base
from joining in a current conversation. If the
intrusion mode is active, it is then possible to
join a conversation in progress using another
handset.
On the navigator key , press or until
the
SETTINGS
screen is displayed, press
OK
to confirm.
Select
SECURITY
using or . Press
Valid.
.
Select
INTRUSION
using or . Press
Valid.
.
A screen displays the current status (on or off).
•
To change the status, press
Edit
.
•
To keep the status, press
Valid.
.
To exit the menu, press the red key .