- 12 -
CREATING A Rx TEST
(In Ubuntu linux 12.04)
1. Open the Terminal, enter the command: sudo su and password.
2. Enter
Insmod /(path of dhd.ko file) firmware_path=/(path of firmware file) nvram_path=/(path of nvram file)
to enable.
3. Enter the wl ver command to check the current WL driver version.
4. Run the following command set
11b/g rate:
./wl mpc 0
./wl phy_watchdog 0
./wl country ALL
./wl band b
./wl channel
7
./wl up
./wl phy_forcecal 1
./wl scansuppress 1
./wl rxchain 1
./wl reset_cnts
./wl counters
This will enter Channel 7 receive mode.
2.4G 11n 20 SISO rate:
./wl mpc 0
./wl phy_watchdog 0
./wl country ALL
./wl band b
./wl chanspec
1/20
Summary of Contents for AW-CM195NF
Page 2: ...2...
Page 27: ...4 1 2 XXXyyyLPDzzzz x...
