AzureWave AW-CM195NF, User Manual

Page: 6 / 27

- 6 -
The throughput measurement shows the performance of the TCP/IP layer over the wireless link. To achieve
the best results,
run the measurement test in a clean environment with as little interference as possible . The test can be run
with the adapter
connected to either an Infrastructure network (see Fig. 2.2) or an ad hoc network (see Fig. 2.3). An AP that is
known to be
in good working order should be used for the infrastructure mode test.
MEASURING THROUGHPUT USING NETIQ CHARIOT
Test Procedure
1. Bring up the AW-CM195NF demo boar with the IP address set as 192.168.1.110.
2. Connect the reference computer with Chariot Console, which is assigned an IP address of 192.168.1.100,
to the LAN
port of the AP
3. Verify that communication exists between the reference computer and the AW-CM195NF demo board by
pinging 192.168.1.100
from the AW-CM195NF host console.
4. Set up Chariot.
HOST
COMPUTER.
AW-CM195NF
EndPoint
Reference
Computer
Chariot
Console
HOST
COMPUTER.
AW-CM195NF
EndPoint
A
P
LAN
Reference
Computer
Chariot
Console
FIG. 2.2
FIG. 2.3