Azure Imaging System User Manual
Page 1
Safety and Regulatory Compliance
Important Safety Information
Please read these instructions before operating the Azure Imaging System.
UV Safety Precautions
The Azure Imaging System comes with a built-in Ultra-Violet (UV 200-400nm) Transilluminator. Exposure to
UV radiation can cause permanent damage to the eyes and skin. The enclosure confines the radiation within
the system and shields the user from exposure. The system is also equipped with a two-way safety interlock
switch which automatically cuts off the power to the transilluminator when the door is opened during
normal use.
It may become necessary to defeat the safety lock or operate the transilluminator outside the system for
service. In this case, be sure to use the following safety precautions:
• Always wear UV-protected eyewear that is specified by the safety equipment manufacturer as
providing protection at the wavelength(s) used, making sure that the eyewear protects any areas
where radiation may come through (UV sunglasses may not prevent UV radiation from coming in
through the sides or around the lenses).
• Always cover all skin that may be exposed to UV light, especially the face, neck, hands, and arms.
• Always make sure that any UV protection devices (such as the safety switch on the light cabinet
apparatus) are working properly. If not, discontinue use until the device(s) are properly repaired.
• Use only UV lamps in the transilluminator and ensure they are the correct size and voltage.
Electrical Safety Precautions
Be sure to take proper precautions when handling any electrical equipment. NEVER work on any live
circuit, fixture, receptacle, or switch. Safety rules you should follow whenever working with any electrical
appliance include:
• Always shut off power at the main disconnect before changing a fuse.
• Always shut off power to the circuit before repairing or replacing a switch, receptacle, or fixture.
• Always tape over the main switch, empty fuse socket, or circuit breaker you are working on.
• Always check that the circuit is dead before beginning work on it. Using a circuit tester or voltmeter
can help you determine this.
• Always unplug any appliance before repairing it.
Protective ground terminal
The ground terminal, intended for connection to an external protective conductor for protection
against electric shock in case of a fault, is located on the inside of the back panel.
Because U.V. radiation can cause serious damage to unprotected eyes and skin, we recommend to
wear U.V. protection glasses or face shield.
CAUTION
Because U.V. radiation can cause serious damage
to unprotected eys and skin, we recommend to
wear U.V. protection glasses or face shield.
UV