Aztech TNT2-16, User Manual

Page: 17 / 26

C
HAPTER
2 – I
NSTALLING THE
G
RAPHICS
C
ARD
D
RIVERS
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
17
2.3 Installing DirectX™ 6.0 in Windows
®
95/98
1. Place the Installation CD onto the CD-ROM drive.
2. In Windows
®
95/98, click the Start button and then Run .
3. In the text box, type " D:\Directx6\directx\dxsetup.exe " (where D is the
letter of your CD-ROM drive) and click OK .
4. A DirectX(R) Setup window appears. Make sure that under Options ,
Direct-3D Hardware Acceleration Enabled is checked. Click Reinstall
DirectX .
5. Follow all on-screen instructions to complete the installation of DirectX.
Please proceed to the next chapter on testing the card.
2.4 Installing the Drivers in Windows NT
®
4.0
1. Start Windows NT
®
4.0.
2. Place the Installation CD in the CD-ROM drive.
3. From the Windows NT
®
taskbar, click the Start button and then select
Settings, Control Panel .
4. Double-click the Display icon.
5. Click the Settings tab and then click the Display Type button.
6. Click the Change button and a Change Properties window appears.
7. Place the Installation CD into the CD-ROM drive and click Have Disk .
Browse to D:\winntX (D is the CD-ROM drive's letter). The system
will locate the driver.
8. Click OK twice to finish the installation of the drivers.