Aztech TNT2-16, User Manual

Page: 10 / 26

C
HAPTER
1 – S
ETTING UP
Y
OUR
G
RAPHICS
C
ARD
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
10
1.8 Connecting the Graphics Card
1. Plug your standard 15-pin male monitor cable into the VGA port , or, if
you are using a Digital Flat Panel, connect the video cable to the
Digital Flat Panel Jack * of the graphics card.
The Aztech TNT2-32TP and Aztech TNT2-32T models support both
Composite Video (CVBS) and S-Video (Y/C). If your TV is equipped
with an S-Video Jack , it is recommended that an S-video cable be
connected for better resolution.
Connect one end of the S-Video cable to the S-Video Jack of the
graphics card and the other end to the S-Video In of a TV set.
Otherwise, connect one end of the RCA-type cable to the TV Out Jack
of the graphics card and the other end to the Video In of a TV.
* Digital Flat Panel Jack is available on Aztech TNT2-32TP
† S-Video Jack and TV Out Jack are available on Aztech TNT2-32TP and
Aztech TNT2-32T
TV Out Jack
S-Video Jack
VGA Port
TNT2
Graphics
Card
Digital Flat Panel
*
†