User Manual
To configure Ingress Layer 3:
1. Select Advanced Menu.
2. Select QoS > Ingress.
3. Select the quickstart interface.
4. Select Static.
5. At the ETHERNET Interface. You are configuring QoS on this interface only. Any
WAN/LAN interface that is not configured has the default Untrusted mode.
6. Select CoS1 in Class of Service. All incoming traffic from the ETHERNET interface
receives CoS1, the highest priority.
7. Click Apply to temporarily activate the settings.
8. To make changes permanent, click Save Settings.
Page 94
of 118
