User Manual
Performing Diagnostic Tests
Diagnostic Test is used for investigating whether the router is properly connected to the
WAN Network. This test may take a few seconds to complete. To perform the test, select
your connection from the list and press the Test button. Before running this test, make
sure you have a valid DSL link.
To run diagnostic test:
1. Select the Basic Menu and then click Diagnostics. This opens the Diagnostics page.
2. Click Test. The test status will appear after running the diagnostic test. If a test
failed, click Help to get the solution.
Ping Test
Once you have your router configured, it is a good idea to make sure you can ping the
network. If you can ping an IP on the WAN side successfully, you should be able to surf
the Internet.
To perform a ping test:
1. Select the Basic Menu and then click Diagnostics.
2. Click Ping Test. This opens the Ping Test page.
Page 116
of 118
