• Coat a film of clean engine oil on seal of new
filter.
• Install new filter rotating it clockwise until
seal contacts mounting surface (B). Then
rotate filter 3/4 turn more by hand.
• Supply engine oil as specified.
• Run the engine for about 3 minutes, stop
engine, and check oil leakage around the
filter.
• Add oil to compensate for oil level drop due
to oil filter capacity (See “Preparation” for
oil level check on pg. 3).
Engine oil is a toxic substance. Dispose
of used oil properly. Contact you local
authorities for approved disposal
methods or possible recycling.
WARNING!
KAWASAKI ENGINE MAINTENANCE SCHEDULE
INTERVAL
MAINTENANCE
Daily First 8 hr. Every 25 Hr. Every 50 hr. Every 100 hr. Every 200 hr. Every 300 hr.
Lubricate Pillow Block Bearings
•
Check and add engine oil
•
Check for loose or lost nuts and screws
•
Check for fuel and oil leakage
•
Check or clean air intake screen
•
Clean air cleaner foam element
•
Clean air cleaner paper element
•
Clean dust and dirt from cylinder and
cylinder head fins
•
Tighten nuts and screws
•
Change engine oil
•
•
Clean and gap spark plugs
•
Change oil filter
•
Replace air cleaner paper element
•
Clean combustion chambers
•
Clean and adjust valve clearance
•
*
•
Clean and lap valve seating surface
•
*After the 1st 50 hours
KAWASAKI ENGINE BATTERY START WIRING DIAGRAM
ULTRAGRIND PG. 11
