Azentek SmartMirror, User Manual

Page: 56 / 68

Working With Maps
Map in Navigation mode
50 SmartMirror User’s Guide 2008
AZENTEK, LLC Revision 2.0
Map in Navigation mode
After the route has been viewed in Preview mode, navigation starts.
Navigation is shown in Navigation mode.
1. Signposting to be followed is displayed here.
2. Posted speed limits are displayed here (where available).
3. The route is marked in orange.
4. When two maneuvers need to be executed in quick succession, the small arrow
field indicates the second maneuver to be executed.
5. The large arrow field shows a schematic depiction of the next maneuver. The
remaining distance to the junction is displayed below the arrow.
As you get closer to the junction, the spot diagram, rather than the distance, is
shown.
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a longer period, you see only a forward-
facing arrow. The distance you travel on the road you are on displays beneath the
arrow.
• Tap the large arrow field to hear current route instructions.
6. The traffic lanes to be followed to your destination are shown in orange.
7. The your current speed and the height above sea level are displayed here.
8. The remaining distance to the destination, the estimated duration of the trip, and
the estimated time of arrival are shown.
9. A triangle in orange shows your current position on the map. The map area dis-
played continually changes so that your current position is always centered on the
map.