13
Chapter 3. Mounting and Wiring
Wiring
CAUTION
When using a relay as the contact for totalized flow count reset input, use a relay
designed for minute currents (with gold contacts).
Failure to do so could cause faulty contact, resulting in malfunction.
If there is a risk of a power surge caused by lightning, use a surge absorber (surge
protector). Failure to do so might cause fire or device failure.
Check that the wiring is correct before turning the power on.
Incorrect wiring can cause damage or malfunction.
For wiring, it is recommended to use a harness with the dedicated
connector (sold separately).
z
Connector pin layout
Compatible connector: DF11-10DS-2C, made by Hirose Electric Co.,
Ltd.
Product
Model No.
Description
Harness with dedicated
connector
(One harness is required
for one CMS unit.)
81446594-005
For non-communication models, 2 m harness without crimp
terminals
81446594-006
For non-communication models, 5 m harness without crimp
terminals
81446594-007
For communication models, 2 m harness with M3.5 spade
terminals
81446594-008
For communication models, 5 m harness with M3.5 spade
terminals
1
2
9
10
View from the connector port
Summary of Contents for Micro Flow CMS 0200
Page 8: ......
Page 35: ...27 MEMO...
