manualshive.com logo in svg

Azbil C7G, Installation And Configuration Manual

Share
Download
Azbil C7G Installation And Configuration Manual Download Page 45

2-3

Chapter 2.  Mounting

 

(3)  Hold the setscrews firmly from the back of the panel and screw the display 

unit mounting screws into the remaining mounting screw holes.  

Two types of display unit mounting screws (M3 machine screws) are supplied 

with the product.  

Select appropriate screws according to the thickness of the control panel.

• 6 mm screws: 1.0–4.5 mm thick control panel 
• 10 mm screws: 4.5–8.5 mm thick control panel

 Handling Precautions

• 

Hold the setscrews firmly. Otherwise the display unit may fall.

• 

Use the mounting screws that are suitable for the thickness of the control 
panel to mount the display unit firmly.

  

(4)  Remove the setscrews and insert the display unit mounting screws.

  

Summary of Contents for C7G











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands