10-15
Chapter 10. PLC Link Communication
z
z
PLC settings
Configure the settings as shown below in GX-Works3.
(1) Go to Project > New and create a new project, with "RCPU" set for Series and
"R04" for Type.
(2) Double-click
[Module Parameter]
of "Parameter."
>> The R04CPU Module Parameter setting window appears.
(3) Select
[Basic Settings]
and set each item of Own Node Settings.
Setting item
Setting
IP Address
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
Enable/Disable Online Change
Enable All (SLMP)
Communication Data Code
Binary
Opening Method
Do Not Open by Program
(4) Click "Detailed Setting" of
[External Device Configuration]
.
>> The Ethernet Configuration setting window for the Built-in Ethernet Port
appears.
(5) Select "SLMP Connection Module" from the Module List, and drag and drop
it.
>> The selected SLMP device is added to the first row. Configure the device
settings, and click the
[Close with Reflecting the Setting]
button.
