Azbil ACTIVAL SCS13A Specifications & Instructions Download Page 2

AB-6464

2

Safety Precautions

Please read instructions carefully and use the product 

as specified in this manual. Be sure to keep this 

manual nearby for quick reference. 

Restrictions on Use

This product was developed, designed, and 

manufactured for general air conditioning use.
Do not use the product in a situation where human 

life may be at risk or for nuclear applications in 

radiation controlled areas. If you wish to use the 

product in a radiation controlled area, please 

contact Azbil Corporation.
Particularly when the product is used in the 

following applications where safety is required, 

implementation of fail-safe design, redundant 

design, regular maintenance, etc., should be 

considered in order to use the product safely and 

reliably. 
• Safety devices for protecting the human body
•  Start/stop control devices for transportation 

machines

• Aeronautical/aerospace machines 
For system design, application design, instructions 

for use, or product applications, please contact 

Azbil Corporation.
Azbil Corporation bears no responsibility for 

any  result,  or  lack  of  result,  deriving  from  the 

customer’s use of the product.

Recommended Design Life

It is recommended that this product be used within 

the recommended design life.
The recommended design life is the period during 

which you can use the product safely and reliably 

based on the design specifications. 
If the product is used beyond this period, its 

failure ratio may increase due to time-related 

deterioration of parts, etc. 
The recommended design life during which the 

product can operate reliably with the lowest failure 

ratio and least deterioration over time is estimated 

scientifically based on acceleration tests, 

endurance tests, etc., taking into consideration the 

operating environment, conditions, and frequency 

of use as basic parameters. 
The recommended design life of this product is 10 

years.
The recommended design life assumes that 

maintenance, such as replacement of the limited 

life parts, is carried out properly. 
Refer to the section on maintenance in this 

manual.

Warnings and Cautions

WARNING

Alerts users that improper handling 

may cause death or serious injury.

CAUTION

Alerts users that improper handling 

may cause minor injury or material 

loss.

Signs

Notifies users that specific actions are 

prohibited to prevent possible danger. 

The symbol inside 

 graphically indicates 

the  prohibited  action.  (For  example,  the 

sign on the left means that disassembly is 

prohibited.)

Instructs users to carry out a specific 

obligatory action to prevent possible danger. 

The symbol inside 

 graphically indicates the 

actual action to be carried out.  (For example, 

the sign on the left indicates general 

instructions.)

 

WARNING

When handling or transporting any heavy 

product  (more than 18 kg), carefully move 

the product with a handtruck or the like, or 

with 2 or more people.

Careless lifting or accidental dropping of 

the product may result in injury or product 

damage.

 

CAUTION

Provide a circuit protector  (e.g., a fuse or 

circuit breaker) for the power source.

Failure to do so may cause a short circuit 

leading to fire or device failure.

Do not freeze this product.

Doing so may damage the valve body and 

cause leakage.

When piping this product, be sure there is no 

foreign matter in the pipes.

If foreign matter remains in the pipes, the 

product may break down.

Install, wire, and use this product under the 

conditions specified by this manual.

Failure to do so may cause fire or device 

failure.

Use full face gaskets for flat face flanges.

Failure to do so may damage the flanges or 

cause leakage outside of the valve.

When installing this product, hold it in the proper 

position and securely fasten it to the pipes.

Excessive tightening or improper installation 

position may damage the valve.

Summary of Contents for ACTIVAL SCS13A

























Reviews: