Connections and
Installation
The Ayre KX-5 is easy to set up and use. The
following guidelines will ensure that the installation
goes smoothly.
As shipped from the factory, none of
the inputs are activated. The desired
inputs are activated by assigning them
names as described in the following
chapter, “Setup and Configuration”.
Location
A good location for your preamplifier is in an
open-backed cabinet or on a shelf. The KX-5
produces very little heat. However be sure not to
block the airflow of other components.
The infrared beam will also
travel through glass.
The receiver for the remote control is behind the
display lens on the front panel. A direct line of sight
from the listening position will ensure maximum
range.
3
