DC Offset
AyreLink equipped power amplifiers incorporate a
circuit to detect the presence of DC at the output
terminals which could be harmful to the
loudspeaker.
The input selector characters will change to read
“
DC
” when excessive DC offset is present.
Disconnect the source component that caused the
error from your system. Then press the right-hand
front-panel button to return the unit to the normal
operate mode and select a different source
component. If the system operates properly in this
case, take the faulty source component to an
authorized dealer or service center.
If there are any unusual noises coming
from the loudspeaker, turn the
rear-panel AC power switch to “Off/0”
immediately
. Please return the unit to
your authorized dealer or service
center.
32
