easily configured to operate an Ayre CX-7e
MP
CD
player (or other disc player that utilizes the RC-5
remote control protocol), or also an Ayre DX-5
Universal A/V Engine.
To change the remote control handset to operate the
CX-7e
MP
, simply press the number button “7” five
times in succession. (Please note that the “Audio”
button used to select soundtracks on DVD discs will
have no function in this configuration.) Press the
number button “8” five times in succession to
change the remote handset to operate the DX-5. To
return the remote handset to operate the C-5xe
MP
again, press the number button “5” five times in
succession.
To ascertain the current configuration of the
remote control handset, press the number button
“0” five times in succession. The backlight
illumination will flash five times to indicate that it is
configured to operate the C-5xe
MP
, seven times
to indicate that it is configured to operate the
CX-7e
MP
, or eight times to indicate that it is
configured to operate the DX-5.
Trigger Control
A trigger control allows one component to control
the system-sleep mode of the KX-5 or the
“Standby” state of another component. If there are
no AyreLink source components available to control
the operation of the KX-5 amplifier, it may be
convenient to use the trigger control from a source
component.
25
