![background image](http://html1.mh-extra.com/html/ayra/9000-0051-4484/9000-0051-4484_user-manual_3042290010.webp)
DMX terminator
In DMX mode, it’s standard practice to place a terminator at the end of a DMX circuit. A DMX terminator is an
electrical termination consisting of a 120 Ohm resistor, that’s placed between the second and third pin to
eliminate possible data reflections. Data reflections can cause strange behaviour in DMX-controlled devices.
DMX-terminators are sold separately but you may yourself decide to solder a 120 Ohm resistor between the
second and third pin of a standard male XLR connector.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:07-10-2019 RV
Revision date and author's initials: -