Signal loss or interference in the
DMX circle
Close the DMX circle with a
terminator or connect a booster
after maximum 32 fixtures.
The device is not reacting to DMX
commands
Incorrect DMX channel mode
Check if the device is set to the
correct DMX channel mode
The operation mode can not be
changed
The device is in Slave mode
If the device is in Slave mode, it
will wait for a master signal unless
there is a DMX signal present. Set
the device to Master to activate the
sound-controlled or automated
operation modes.
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials:14-02-2017 RV
Revision date and author's initials: -