background image

Symbol explanation:

WEEE: 

Ensure that this device is disposed of properly. This product falls under the WEEE 

(Waste Electrical and Electronic Equipment) directive. The requirements of this directive apply
to all manufacturers and producers of electronic devices in the EU. Do not throw this product 
away with regular rubbish. Please contact your local authority for more information about how 
to recycle and dispose of these products in your region. By recycling this product in the proper
manner, we can work together to ensure that we can continue to enjoy these kinds of 
products and still protect the environment as much as possible from pollution. 

CE:

 The CE logo indicates that this product meets the European norms and requirements to 

which it must legally conform.

Only suitable for indoor use

: this product was only designed for indoor use. The maximum 

environmental temperature must not exceed 40 degrees Celsius (104 degrees Fahrenheit). 

Contact:

Ayra professional lighting products

Verrijn Stuartweg 18

4462 GE Goes

The Netherlands

Please do not send any products to this correspondence address.

Should you wish to send in a product for repairs or for a refund, please contact your dealer for an RMA

request (Return Merchandise Authorisation).

The information in this user manual is subject to change at any time without notice.

Version: 1.0

Date of creation and author's initials:14-02-2017 RV

Revision date and author's initials: -

Summary of Contents for 9000-0031-9641
















Reviews: