background image

with liquids on top of the unit.
- Avoid nearby flames or heat sources, do not place this device near flammable liquids, gas or flammable 
items.
- Always disconnect the device when it is not in use for a longer period or time, when servicing is needed, or 
when the device needs cleaning.
- Only handle the power cord by its connectors. Never pull the cable to remove a connector from its socket, 
as this could lead to damage and electric shocks.
- Always operate this device with a stable AC current.
- Always operate this device with the AC ground wire connected to the electrical system's ground.
- Never use other types of cables other than those specified in the manual, do not use defective or 
malfunctioning cables. Contact your dealer if the included or required cables do not work properly with this 
device.
- If the device has been exposed to considerable temperature changes (for example, transport from outdoors
to indoors), do not connect the device immediately. Do not activate the unit until it has reached room 
temperature as moisture might build up inside the unit, which may cause it to short-circuit and/or cause 
electric shocks.

Guidelines and types of use:

- This device is intended to be used by adults for entertainment lighting in locations such as community 
centres, bars, dance studios, rollerskating rinks, bowling alleys, etc.
- This device is not suitable for use by children and must always be operated by an adult.
- Only use the device when the environment is suitable and will not cause any damage. Do not use the 
product in damp or dusty environments, or where permanent damage may occur such as: 

- indoor swimming pools where chlorine is used.
- Beaches, where sand and salt are present.
- Outdoors.
- Indoor areas where intense heat sources are present or where the temperature exceeds levels that 

are comfortable for humans.
- Use only the included power cable and only connect the device to a suitable power outlet with the correct 
output voltage. Connecting the device to a power outlet with the wrong type of voltage or using the product 
with a wrong type of power supply may cause permanent damage to the device.
- Avoid shocks and collisions during use and transport. Do not transport the device while in use. Avoid brute 
force during the installation and operation of this device.
- Familiarise yourself with the functions of the device before use. Do not allow operation of the device by 
unskilled or unqualified people.
- Use of the device in ways other than described in this user manual may cause damage and injury. Ayra 
cannot be held responsible for any damage or injury caused by improper use.

Storage and transport:

- This device is intended for mobile use as well as fixed installations. During transport, use the original 
packaging of the product, the included flight bag or a fitting flight case, preferably filled with foam.
- This device is not intended for continuous use. Operation breaks will ensure that the lifespan of the device 
is not reduced.
- If the device is not used for a longer period of time, disconnect it from its power source and store it in its 
original packaging, or in a fitting flight case.
- Store the device under dry conditions indoors, and do not expose the device to extreme temperature 
changes.

Housing:

- Inspect the housing of the device frequently. Make sure there are no severe dents, cracks or missing 
screws. Do not use the device if the housing is not in optimal condition. Contact your dealer or a skilled 
technician when in doubt about the state of the device.
- Check the fixture and screws for corrosion. Corrosion should not be present on the fixture. Contact your 
dealer or a skilled technician if corrosion is found on the fixture.
- Every power or signal chassis connector should be mounted tightly. Do not use the device if connectors are
loose.
- Do not use the power cord if the wires are visible. The cable cannot be replaced by the user and should 
only be repaired or replaced by a skilled technician.

All information and illustrations shown in this user manual are subject to change without further notice.

User manual version: 1.0

Creation date + author initials: 04-11-2015 RV Revision date + author initials: 

Summary of Contents for 9000-0021-6276


















Reviews: