SLND:
Select the right master or slave mode for the fixture. The standard mode is the master mode. Select
Slave mode 1 or 2 (2 is partially reversed in music-controlled mode), and the fixture will only follow signals
provided by the master fixture.
To use the master/slave mode, connect two ComPar 2 fixtures using a standard 3P XLR male - 3P XLR
female cable (not included). Connect the DMX output of the master to the DMX input of the slave unit.
Regardless of the mode selected on the master fixture (AutoRun, Sound-controlled), the slave will mimic the
actions.
NOTE:
please note that it is not possible to switch to any operating mode if the Slave mode is activated on
your fixture!
SHND:
The show modes grant access to the various stand-alone operating modes. A short explanation:
COLO: Colour presets, choose between 7 static colours.
RGBW: This product allows for RGB only. Set all dimmer levels individually to achieve a custom colour
preset.
JUMP: Colour jump, jumps directly from one colour preset to the next. Strobe can be set individually.
FADE: Colour fade, fades smoothly from one colour preset to the next. Strobe can be set individually.
SHOW: Sound-controlled mode
SOUN:
The sound status shows whether the unit's built-in microphone is activated or not. It can be enabled
or disabled in the menu with the ON/OFF selector.
SENS:
The sensitivity of the built-in microphone is adjustable, in order to optimise the built-in sound-
controlled mode. If your music source (speakers) is placed far away, for instance, it is possible to increase
the sensitivity, making sure that the fixture responds to the sound accurately. The sensitivity can be adjusted
from 0 to 100, 100 being the most sensitive.
LED:
LED display on/off. If you use this device in a club or theatre, the environment is usually dark.
Therefore, it is possible to shut off the LED menu display light when it is not in use. The default setting is ON,
which means that the LED display remains on all the time. Set to OFF, the display will switch off when it
hasn't been used for approximately one minute.
DISP:
Display flip function. Invert the display status, and the status of the buttons will also change. From the
correct reading position, Menu is always on the left and Enter is always on the right. This feature is
particularly practical if the device is suspended near a wall, so you cannot read the status easily.
TEST:
When this mode is selected, the unit tests each LED colour individually. During maintenance broken
LEDs can be easily spotted.
HOUR:
Service intervals are primarily used by rental companies and by users who use their fixtures
frequently. After a specific number of operating hours, the fixture is brought in for service, to check if all
components are in good shape and to fix any problems. This function displays the number of hours that the
product has been used.
VER:
Displays the firmware version that is installed on the PCB. Users cannot upload new firmware to this
fixture.
REST:
Resets the fixture without removing the power cables or switching the unit off.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 04-11-2015 RV Revision date + author initials: