background image

Guidelines for fog machines

Fluid guidelines:

- Only use water-based fog liquids!
- Ayra recommends the use of Ayra fog machine fluid only. Other types of fog liquid may cause permanent 
damage or bad performance. When the wrong type of fog liquid is used, the machine might spray hot liquid. 
- It is possible to keep fog machine fluid in the tank during transport. Pay close attention to possible tipping. 
When transporting this device with fluid still in the tank, the maximum level should not exceed 50%!
- When transporting this device with parcel delivery companies (or any other way of transport where the 
device could be positioned upside-down), the fluid tank needs to be fully drained.

Temperature guidelines:

- The fog machine requires a heat-up time. It is not directly ready for use when switched on.
- The temperature of the heating element is set in the factory. Do not attempt to change the set temperature 
of the device.
- The fog coming out of the fog machine is very hot and moist at short distance. Keep animals, children, 
flammable objects and electronic devices away from the fog machine and its output.
- After use, turn off the machine, unplug the power cable from its socket and let the machine cool down for at 
least 20 minutes. Do not transport the machine while it is still hot! Small puffs of fog may be produced during 
cool-down time. 

Ventilation and health guidelines:

- Always make sure that there is sufficient ventilation in the room. Fresh air needs to be able to enter the 
room and vaporized fog needs to be able to be drained from the room.
- Use caution with the amount of fog used. Only small amounts of fog are required to accentuate professional
lighting and make the beams visible. Do not keep producing fog when the visibility drops below 2 meters.
- The use of fog is not hazardous for people or animals, if used with caution and proper ventilation. Do not 
use more fog than needed to achieve the desired effect.

Exterior guidelines:

- Do not cover the nozzle of the fog machineor place a tube over the nozzle.
- When using the fog machine in a standing or hanging position, do not adjust the vertical angle by more than
15% up or down.
- When used in a hanging position, the device always needs to be secured by using a safety cable. Attach 
the safety cable to the provided safety eye with the carabiner hook. A safety cable is not included in the 
delivery and can be purchased separately.
- The device must be installed on a flat surface or hang from a solid construction  using the included bracket. 

The information and illustrations shown in this user manual are subject to change without  notice.

User manual version: 1.0

Creation date + author initials: 03-11-2015 RV Revision date + author initials: -

WARNING!

This machine has a built-in heating element. The housing of this device may become very hot 
during use. Do not touch the housing of the device during use and do not place your hand in 
front of the fog machine output nozzle!

WARNING!

Large amounts of fog in a badly ventilated room may cause headaches, lightheadedness, 
dizzyness and possible other health-related issues. If any of these symptoms occur, stop 
producing fog immediately and open a door or window to let fresh air into the room.

Summary of Contents for 9000-0021-6270














Reviews: