- Your installation spot must be in optimal condition. Check your installation spot for corrosion, cracks, dents
and strength.
- Electrical components (connectors and cables) must be in optimal condition. No form of damage (cuts,
exposed wire cores or any other irregularities) should be visible.
If any visual or mechanical damage is detected, contact your local dealer or a specialised technician. Do not
use a damaged or failing fixture.
Storage for a longer period of time
If the machine will not be used for a longer period of time (>1 month), the fluid needs to be drained from the
machine to prevent clogging of the system.
When the machine is still turned on, but about to be shut down, twist the cap off the fluid tank and remove
the hose from the tank. The fluid tank can be drained, for example in the original fog fluid container.
Now, spray fog until the output of the machine drops significantly. This way, remaining fluid which is trapped
inside the heating system will be removed. If noise from the pump increases and the fog output becomes
low, stop pressing the remote and shut down the machine for cooling.
The empty tank can now be installed back into its compartment and the hose and cap can be installed again.
After cooling the machine is ready for storage for a longer period of time.
The information and illustrations shown in this user manual are subject to change without notice.
User manual version: 1.0
Creation date + author initials: 03-11-2015 RV Revision date + author initials: -