Aydin Displays CFP32W1 Large Screen Series, User Manual

Page: 12 / 26

Change The RCU Battery (RCU option)
(1) (2)
(3)
i. Push down as picture (1) and pull the back cover.
ii. Replace with the new batteries as picture (2), 1 piece Lithium battery(CR2032) make sure the
polarities of batteries are correct.
iii. Place the back cover and slide it as in the picture (3).
iv. Used batteries needed to follow the city rule to be discarded.
v. Avoid keeping used, old batteries inside the remote control, causing leakage of internal liquid
resulting metal rust or fatal damage to the remote control hand unit.
vi. Battery to be used according to the instruction
CAUTION
Risk of explosion if batty is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
About the remote controllers
Please don’t drop, shake or bump.
Please don’t place on wet materials.
Please don't dismantle.
Please don’t place in locations exposed to high-temperature or high-humidity levels.
Display Mode
Main Source mode
The main source mode will be changed in the sequence as follows: VGA/DVI/ AV(Composite) / S-Video/
YPbPr(Component) by remote control or the “ source ” key of the monitor.
PIP(sub source) mode
Please select PIP input source(function) form the PIP button on the remote controller. There is no PIP button on
side controller of the monitor.
The sub-source changes as the main source changes. (picture 1)
150-CFP-320 Page 12