Aydin Displays Cambridge CFP42W1, User Manual, Page: 17 / 27

D. Language Setting (English only)
On side of controller:
1. Press “ MENU ” to enter Main Menu.
2. Press “
＞
/
﹣
” 3 times and press the “ Enter ” to enter item.
3. Press ”
﹀
” to select sub-item(English only),
4. Press ” Enter ” to save the setting, when finish adjusting.
5. Press “ MENU ” to exit the item.
On RCU:
1. Press “ MENU ” ->” ENTER ” to enter picture setting
2. Press“
Z
” or “
Y
” to select Main Menu.
3. Press “ ENTER “ to enter item.
4. Press ”
▽
” to enter sub-item(English only),
5. Press “ ENTER ” when finish adjusting.
6. Press” EXIT “ to exit the item
E. Original Default Setting
On side of controller:
1. Press “ MENU ” to enter Main Menu.
2. Press “
＞
/
﹣
” 4 times to select original default setting.
3. Press “ Enter ” to enter item.
4. Press ”
﹀
” to select sub-item(Factory Reset. Set display …),
5. Press “
＜/
” or “
＞
/
﹣
”to adjust
6. Press ” Enter ” to save the setting ,when finish adjusting.
7. Press “ MENU ” to exit the item.
On RCU:
1. Press “ MENU ” to enter Main Menu.
2. Press“
Z
” or “
Y
” to select Main Menu.
3. Press “ ENTER “ to enter item.
4. Press ”
▽
” to enter sub-item(Factory Reset. Set display …),
5. Press “
Z
” or “
Y
” to adjust
6. Press “ ENTER ” to save the setting, when finish adjusting..
7. Press” EXIT “ to exit the item
F. Input Signal Selection
On side of controller:
1. Press the “ MENU ” to enter Main Menu.
2. Press “
﹀
” to enter
3. Press “
＜/
” or “
＞
/
﹣
” to select single input.
4. Press ” Enter ” when finish adjusting.
On RCU:
1. Press the “ MENU ” to enter Main Menu.
2. Press ”
▽
” to enter
3. Press “
Z
” or “
Y
” to select single input.
4. Press “ Enter ” when finish adjusting.
150-CFP-420 Page 17