89
88|
GB
•
Slide the grass bag frame into the grass bag and attach the clips as shown. (See Fig.4A)
•
Lift the rear discharge guard, remove the mulching plug, and install the grass bag.
Rear Discharge Guard Props
Take out two supports in a bag from carton, and lift the rear discharge guard, install the two
supports which can hold the rear discharge guard, and this can make the grass out more
efficiently from the deck.
Grass catcher Assembly
Mulching plug
The mulching plug helps to curve the inside of the mower deck for more efficient mulching.
Install and remove the mulching plug by raising the rear discharge guard as shown.
The mulching plug only fits one way. Remove the mulching plug when using a grass bag.
Fig.4A
Fig.4B
Fig.6
Fig.7
Fig.5
Warning!
Please make sure all wheels are OK before use! Make the machine run manually with
power off on a small distance and check that no problem occurs.
Always fit the grass bag before starting the engine. The grass bag is a protection elements
for retaining grass projection. Check that hooks are well in place on the rear deck.
The Lawnmower shall not be operated without either the entire grass bag and the rear
cover up in place. The rear cover is a protection element for maintaining the bag collecti
on in place and to hide automatically the rear deck to avoid projection when the collection
bag is not in place. When in place, the rear cover must press on the grass bag.
Filling with fuel
WARNING! Petrol is highly inflammable and extreme precautions must be taken
when handling or working with it. Petrol should only be stored in approved containers.
Never buy, or store more than 30 days supply of petrol. Do not mix oil with petrol.
Clean the area around the petrol filler cap before removing the cap, see figure 7.
