to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration, such as maintaining the tool and the
accessories, keeping hands warm, adjusting work patterns to avoid risk of vibration.
TROUBLE SHOOTING
Before performing any maintenance or cleaning work, always turn off the engine and
wait until the generator has come to a standstill.
WARRANTY CERTIFICATE
Congratulations! You have made an excellent choice with the purchase of this quality
product. Our commitment to quality also includes our service.
CONDITION
PROBABLE CAUSE
CORRECTIVE
ACTION
Loose spark plug
Tighten plug
properly
Insufficient
compression
Loose cylinder
head bolt
Tighten bolt
properly
Damaged gasket
Replace gasket
Fuel
systems
problems
Insufficient
pulling speed
for starting rope
Pull rope
sharply
Engine
won’t start
No fuel
supplied to
combustion
chamber
Foreign matter
in fuel tank
Clean tank
Clogged
fuel line
Clean fuel line
Low engine
output
No fuel in tank
Supply fuel
Fuel shutoff
not open
Open valve
Engine run
erratically
Electric
systems
problems
Spark plug dirty
with carbon
or wet with fuel
Remove carbon
or wipe up
spark plug
Sufficient
compression
Improper
spark
Damaged
spark plug
Replace
spark plug
Combustion
chamber
supplied
with fuel
Faulty
magneto
Improper
adjustment of
carburetor
Consult dealer
Improper
spark
Insufficient
pulling speed
for starting rope
Pull rope
sharply
Improper
grade
of fuel used
Check fuel
Overloading
Check
the working
condition
Overheating
Congratulations! You have made an excellent choice with the purchase of this quality
product. Our commitment to quality also includes our service.
Jumbo offers an excellent repair service, exclusively in Switzerland, for all ayce
Power Tool products.
Should you, contrary to expectations, experience defects due to
material or manufacturing faults during private use within
FIVE YEARS
of the date of purchase we shall be liable for
warranty in accordance with statutory warranty regulations,
provided that:
- The device was not put to any use other than the intended.
- Was not overloaded.
- Was not used with the wrong accessories.
- Repairs where not carried out by any other than the authorized
workshop.
The warranty certificate is only valid in connection with the receipt. Please keep both in
a safe place. The warranty does not affect your statutory rights. The product is
guaranteed for a period of
FIVE YEARS
beginning on the day of purchase. Keep your
purchase receipt safe as proof of the date of purchase. The guarantee period can only be
extended for the duration of any repair required. During the warranty period, defective
devices can be returned at every Jumbo store. We will, at our discretion either repair or
exchange the device in accordance with warranty legislation.
Please include the following when returning your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault
description completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After the
warranty has expired you can still return defective devices for repairs. Quotes as well as
repairs after warranty period are to be paid for in all cases.
Additional note service center:
Defect products can be returned to every jumbo store during the warranty period.
After the warranty period, the ayce products are accepted in any jumbo store, so the
product may be tested in accordance.
CH-Import & Distribution exklusiv durch:
Jumbo-Markt AG
Industriestrasse 34
8305 Dietlikon
5
JAHRE GARANTIE
ANS GARANTIE
ANNI GARANZIA
WARRANTY CERTIFICATE
GB
|
15 16