25
COMMON PHENOMENA TROUBLE SHOOTING
Instruction trouble shooting
The following cases are not malfunction. Please check according to below steps
before asking for service.
• No current; abnormal voltage; fusing; out in the plus uneffectively ,check the plug
and fuse.
• Not efficient
The temperature adjustment knob is in the 0 position;
Space around the refrigerator is not enough;
The door has been opened too frequently and too long;
The refrigerator is exposed to the sunlight directly or place near some heat
sources;
There is no space between foods;
There are hot foods inside the case.
Please read the points of attention, keep away from the heat source, do not open
the door frequently, put the hot foods in the case after it is cooled down. Adjust the
knob to 5 to 6 position.
• Foods frozen in the refrigerator compartment or chilled case.
The temperature knob is in 7 position;
Foods containing rich water and freezed easily are near the rear wall.
Troubles of sensors or control, adjust the knob to 3 position.
• Noises
The refrigerator is not located firmly;
The refrigerator has been struck to other objects;
The copper pipe has been struck each other in the mechanical room;
Locate the refrigerator at a firm base and separate the copper pipe from other
objects in the mechanical room.
• Compressor can not stop working automatically
Store too much foods at one setting;
Open the door frequently or too long;
The temperature knob is in 7 position;
Foods should be stored in separated batches, do not store too much food at one
setting;
Decrease the frequence of opening the door and shorten the time of opening the
door.
• Compressor cannot start
Turning on the power, the refrigerator cannot work exceeding 30seconds.pullthe
plug down at once.
Reinsert the plug, if the refrigerator still do not work. Please contact with service
department.