22
2
Clearing with
wet cloth
Tear down the tape
firming case
3
Turn on the power
4
Storing after turning on
power 4~5 hours
The smell of plastic will disappear
automatically a period later.
Don
’
t o pen
the door
I n h o t s e a s o n f r e e z i n g f o o d s c o m p l e t e l y n e e d s 2 4 h o u r s .
check the cooling condition in the next day .something such as
ice-cream should be frozen completely.
5
Pay more attention while moving.
Screw compressors are adopted inside. Inclination angle is no more than 45 degree.
Changing the light bulb
Temperature adjustment . . . Usually in MID position
If you need to replace the lamp, please according to below instruction,
1.oull out the power plug first,
2.unscrew the old lamp, replace the new lamp,
Note: the lamp power is 10W,
the bulb must be according to IEC 60079-15.
Temperature knob is to be adjusted temperature of box. The number on it can not show temperature
Big number show the temperature of box is low and little number show is high."0"show stop. In winter,
usually place the knob at 4-7,In summer usually place the knob at 4-1.
Caution:
1.Please obey the step of control;
2.Improper adjust may lead to lower temperature, higher temperature or influence energy consumption.