![background image](http://html1.mh-extra.com/html/aya/adw06000a/adw06000a_instructions-for-use-manual_3041844030.webp)
10 mm
10 mm
-27-
Rinse Aid Dispenser
3 mm
3 mm
B. Fill the Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes.
spots and streaks. It also improves drying by allowing water to sheet off the dishes. Your dishwasher is designed to use
liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser,
open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The volume of the
rinse aid container is about 110ml.
That can leave
If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the color of
the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole indicator
will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid
get below 1 / 4 full.
" "
10 mm
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any
cleaning agent, liquid detergent). This would damage the appliance.
other substances (e.g. Dishwasher
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
1
2
3
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
When to Refill the Rinse Aid Dispenser
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
10 mm
10 mm
10 mm
10 mm
10 mm
NOTE:
1
2
3
C (Rinse-Aid indicator)