10 mm
10 mm
10 mm
-34-
Forgot to Add a Dish?
A forgotten dish can be added any time before the detergent cup opens.
4. Add forgotten dishes.
5. Close the door
3. After the spray arms stop working,you can open the door completely.
2. Open the door a little to stop the washing.
1. Press the start/reset button
6. Press the start/reset button, the dishwasher will run
after 10 seconds.
Change the Programme
10 mm
10 mm
3 mm
3 mm
NOTE:
NOTE:
When you press the Start/Reset button to pause during washing,the program light will stop blinking and the
dishwasher will mooing every minute unless you press the Start/Reset button to start.
WARNING!
It is dangerous to open the door when washing, because the hot water may scald you.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Switch Off the Dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
At the End of the Wash Cycle
When the working cycle has finished, the buzzer of dishwasher will sound 8 seconds, then stop. Turn off the
appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still
hot and more susceptible to breakage. They will also dry better.
If you open the door when washing, the machine will pause. When you close the door , the machine will keep on
working after 10 seconds.
Premise: You can modify the washing program, When the dishwasher just runs for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water. If this
is the case, the detergent dispenser must be refilled (see the section entitled " Loading the Detergent " ).
If the machine operation, you want to convert program, press the start/reset button, and then click Program
Button that you want to choose more than 3 seconds, can be turned to the program, enter standby(see the
section entitled " Starting a wash cycle. . ." ).
The program lights show the state of the dishwasher:
a) One of the program lights on-------stand by
b) One of the program lights on----------pause
c) One of the program lights blinking----- run