AXXIV Serius 15S10 Manual Download Page 238

Page: 238 / 250

Intel Video Driver Controls

B - 6 Attaching Other Displays

To Enable Extended Desktop:

Attach your display to the external monitor port or HDMI-Out port, and turn it on.

Go to the

Intel(R) G&M

control panel and click

Display

> Multiple Displays

Click

Operating Mode

and select

Extended Desktop

from the menu.

Click

Apply

, and

to confirm the settings change.



Display Settings

Extended Desktop

You can have different
Colors, Screen Area
and Monitor Refresh
Rates for each display
device

provided your

monitor can support
them

You can drag the moni-
tor icons to match the
physical layout of your
displays. Icons and pro-
grams may also be
dragged between the
displays.

Figure B - 4

Display > Multiple

Displays (Extended)

Click the appropriate monitor
icon and drag it to match the
physical arrangement you
wish to use (e.g. the second-
ary display may be extended
left/right/above/below the
primary display).

Click General Settings to
make any adjustments re-
quired.

Summary of Contents for Serius 15S10



























































































































































































































































Search results

Summary of Contents for Serius 15S10

Reviews:

AXXIV Serius 15S10, Manual, Page: 238 / 250

Search results

Summary of Contents for Serius 15S10

Reviews: